DEEPCAST: CRYSTAL CLEAR, WITHOUT VISIBLE LAYERS, WITHOUT BUBBLES!
Epoxy resin as filling, that is also possible. With DEEPCAST ??you can pour up to 12 liters in one go, several centimeters high. Perfect, for example, for a river table or to pour in larger objects.
DEEPCAST Clear Casting Resin (CER) - Set in 5 Sizes
From
€55.00*
THE PRODUCT DEEPCAST
That's it.
You can also work well with synthetic resin beyond classic painting grounds: Cast large casting heights, high volumes, unusual shapes and 3D molds. DEEPCAST ??is a two part resin and one of the highest quality products on the market. The application is easy and safe. With DEEPCAST ??you will create impressive objects.
It can.
When mixing its two individual components, DEEPCAST ??becomes a hard and glass-like cast. It also offers the best possible protection against yellowing. So-called UV stabilizers ensure this: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer).
That's what it's for.
We developed DEEPCAST ??specifically to fill cavities. This makes it perfect for making a river table, for example. Pour up to twelve liters in one go with DEEPCAST ??and achieve a layer height of 5 cm and more.
Particularities.
DEEPCAST ??has a long curing time, which means it will not shrink as it cures - an important consideration for crafts and artists. The reason for this is the low heat development. With DEEPCAST, the exothermic reaction when resin and hardener are combined is significantly weaker than with other resin systems.
Measuring, mixing and processing DEEPCAST
1. DEEPCAST ??resin and hardener are mixed by volume 2:1. Place the two components in a mixing bowl.
2. Stir the measured amount in the mixing bowl. Use a stir stick for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and the edges of the mixing vessel.
3. Your mix is ??ready and you now have 25 hours* to process the resin. After that it becomes too thick and begins to harden.
4. You have previously prepared your form accordingly. Now pour the resin mixture into the mold.
5. Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done.
You should pay attention to this:
Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety:
•Always wear nitrile gloves.
•When sanding cured resin, wear a dust mask, and better yet, wear safety goggles.
•It is advisable to work in a well-ventilated room.
•Avoid skin contact (if resin gets on skin, wash with plenty of soap and water).
•DO NOT eat, drink or smoke while working.
•If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately.
•Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If using alcohol inks, DO NOT use a flame to remove bubbles as alcohol is flammable.
DEEPCAST ??does not contain a drying accelerator. Therefore, both the processing and the curing time for this resin are significantly longer than for others.
You can find more technical information about the Eli-Chem-Resin DEEPCAST ??in our overview table.
DEEPCAST ??is available in the following sizes: 1.5 l, 3 l, 7.5 l, 37.5 l
Content: 1.5 Liter (€36.67* / 1 Liter)
Jetzt entdecken: Unser HYDROFLOW!
hydroflow Water Based Casting Compound - Set 1,75 kg
€32.90*
Inhalte:
1,75 kg - Set
OUR HYDROFLOW, ECO-FRIENDLY AND WATER-BASED
That's it.
Our hydroflow is a water-based casting compound that you can use to create decorative and functional objects. It offers a cement-like surface that you can decorate with various objects.
It can.
Our hydroflow consists of two components, a mineral powder and a water-based acrylic binder. The hydroflow is easy to color with water-based pigments such as the resi-TINT acrylic inks and is particularly easy to use. You can also add sand, quartzite, shards, dried flowers or mica to your hydroflow object, for example.
That's what it's for.
Our hydroflow offers you various application possibilities. You can craft objects such as coasters, vases, bowls, plates, or planters. Jewelery or sculptures are also possible. You can even create pieces of furniture such as side tables with hydroflow, or you can use hydroflow in structural art.
Particularities.
Due to its water-based formula, hydroflow is environmentally friendly and biodegradable. It offers heat resistance up to 125°C, has a shelf life of up to one year and can be decorated with various solids. Hydroflow is porous and can be sealed with an acrylic sealer such as our resi-CRETE acrylic emulsion with a brush.
Measuring, mixing and processing hydroflow
1.) Mineral powder and water-based acrylic binder are mixed by volume 2.5:1. Place the two components in a suitable mixing cup.
2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 2-3 minutes; also on the bottom and edges of the mixing cup.
3.) Once your mass has reached a creamy consistency, add your desired pigment. You can add a little pigment to the water-based acrylic binder before mixing the two components.
4.) Your mixture is now ready and you have 10-20 minutes to process the hydroflow. After that it becomes too thick and begins to harden.
5.) You have prepared your mold beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour the hydroflow color mixture into your mould.
6.) Stir the mass inside the mold to remove any air bubbles. This also applies if the mass thickens quickly when pouring.
7.) The hardening process takes 20-40 minutes. Your form will begin to heat up with the chemical reaction.
8.) After one to two hours you can remove your mold from your object. You then have the opportunity to further edit your art object. It is a good idea to cover your object with clear resin or to seal it with our resi-CRETE acrylic emulsion.
Content: 1.75 Kilogramm (€18.80* / 1 Kilogramm)
hydroflow Water Based Casting Compound - Set 3,5 kg
€42.90*
Inhalte:
3,5 kg - Set
OUR HYDROFLOW, ECO-FRIENDLY AND WATER-BASED
That's it.
Our hydroflow is a water-based casting compound that you can use to create decorative and functional objects. It offers a cement-like surface that you can decorate with various objects.
It can.
Our hydroflow consists of two components, a mineral powder and a water-based acrylic binder. The hydroflow is easy to color with water-based pigments such as the resi-TINT acrylic inks and is particularly easy to use. You can also add sand, quartzite, shards, dried flowers or mica to your hydroflow object, for example.
That's what it's for.
Our hydroflow offers you various application possibilities. You can craft objects such as coasters, vases, bowls, plates, or planters. Jewelery or sculptures are also possible. You can even create pieces of furniture such as side tables with hydroflow, or you can use hydroflow in structural art.
Particularities.
Due to its water-based formula, hydroflow is environmentally friendly and biodegradable. It offers heat resistance up to 125°C, has a shelf life of up to one year and can be decorated with various solids. Hydroflow is porous and can be sealed with an acrylic sealer such as our resi-CRETE acrylic emulsion with a brush.
Measuring, mixing and processing hydroflow
1.) Mineral powder and water-based acrylic binder are mixed by volume 2.5:1. Place the two components in a suitable mixing cup.
2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 2-3 minutes; also on the bottom and edges of the mixing cup.
3.) Once your mass has reached a creamy consistency, add your desired pigment. You can add a little pigment to the water-based acrylic binder before mixing the two components.
4.) Your mixture is now ready and you have 10-20 minutes to process the hydroflow. After that it becomes too thick and begins to harden.
5.) You have prepared your mold beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour the hydroflow color mixture into your mould.
6.) Stir the mass inside the mold to remove any air bubbles. This also applies if the mass thickens quickly when pouring.
7.) The hardening process takes 20-40 minutes. Your form will begin to heat up with the chemical reaction.
8.) After one to two hours you can remove your mold from your object. You then have the opportunity to further edit your art object. It is a good idea to cover your object with clear resin or to seal it with our resi-CRETE acrylic emulsion.
Content: 3.5 Kilogramm (€12.26* / 1 Kilogramm)
Variants from €32.90*
hydroflow Water Based Casting Compound - Set 7 kg
€69.90*
Inhalte:
7 kg - Set
OUR HYDROFLOW, ECO-FRIENDLY AND WATER-BASED
That's it.
Our hydroflow is a water-based casting compound that you can use to create decorative and functional objects. It offers a cement-like surface that you can decorate with various objects.
It can.
Our hydroflow consists of two components, a mineral powder and a water-based acrylic binder. The hydroflow is easy to color with water-based pigments such as the resi-TINT acrylic inks and is particularly easy to use. You can also add sand, quartzite, shards, dried flowers or mica to your hydroflow object, for example.
That's what it's for.
Our hydroflow offers you various application possibilities. You can craft objects such as coasters, vases, bowls, plates, or planters. Jewelery or sculptures are also possible. You can even create pieces of furniture such as side tables with hydroflow, or you can use hydroflow in structural art.
Particularities.
Due to its water-based formula, hydroflow is environmentally friendly and biodegradable. It offers heat resistance up to 125°C, has a shelf life of up to one year and can be decorated with various solids. Hydroflow is porous and can be sealed with an acrylic sealer such as our resi-CRETE acrylic emulsion with a brush.
Measuring, mixing and processing hydroflow
1.) Mineral powder and water-based acrylic binder are mixed by volume 2.5:1. Place the two components in a suitable mixing cup.
2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 2-3 minutes; also on the bottom and edges of the mixing cup.
3.) Once your mass has reached a creamy consistency, add your desired pigment. You can add a little pigment to the water-based acrylic binder before mixing the two components.
4.) Your mixture is now ready and you have 10-20 minutes to process the hydroflow. After that it becomes too thick and begins to harden.
5.) You have prepared your mold beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour the hydroflow color mixture into your mould.
6.) Stir the mass inside the mold to remove any air bubbles. This also applies if the mass thickens quickly when pouring.
7.) The hardening process takes 20-40 minutes. Your form will begin to heat up with the chemical reaction.
8.) After one to two hours you can remove your mold from your object. You then have the opportunity to further edit your art object. It is a good idea to cover your object with clear resin or to seal it with our resi-CRETE acrylic emulsion.
Content: 7 Kilogramm (€9.99* / 1 Kilogramm)
Variants from €32.90*
hydroflow Water Based Casting Compound - Set 14 kg
€94.00*
Inhalte:
14 kg - Set
OUR HYDROFLOW, ECO-FRIENDLY AND WATER-BASED
That's it.
Our hydroflow is a water-based casting compound that you can use to create decorative and functional objects. It offers a cement-like surface that you can decorate with various objects.
It can.
Our hydroflow consists of two components, a mineral powder and a water-based acrylic binder. The hydroflow is easy to color with water-based pigments such as the resi-TINT acrylic inks and is particularly easy to use. You can also add sand, quartzite, shards, dried flowers or mica to your hydroflow object, for example.
That's what it's for.
Our hydroflow offers you various application possibilities. You can craft objects such as coasters, vases, bowls, plates, or planters. Jewelery or sculptures are also possible. You can even create pieces of furniture such as side tables with hydroflow, or you can use hydroflow in structural art.
Particularities.
Due to its water-based formula, hydroflow is environmentally friendly and biodegradable. It offers heat resistance up to 125°C, has a shelf life of up to one year and can be decorated with various solids. Hydroflow is porous and can be sealed with an acrylic sealer such as our resi-CRETE acrylic emulsion with a brush.
Measuring, mixing and processing hydroflow
1.) Mineral powder and water-based acrylic binder are mixed by volume 2.5:1. Place the two components in a suitable mixing cup.
2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 2-3 minutes; also on the bottom and edges of the mixing cup.
3.) Once your mass has reached a creamy consistency, add your desired pigment. You can add a little pigment to the water-based acrylic binder before mixing the two components.
4.) Your mixture is now ready and you have 10-20 minutes to process the hydroflow. After that it becomes too thick and begins to harden.
5.) You have prepared your mold beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour the hydroflow color mixture into your mould.
6.) Stir the mass inside the mold to remove any air bubbles. This also applies if the mass thickens quickly when pouring.
7.) The hardening process takes 20-40 minutes. Your form will begin to heat up with the chemical reaction.
8.) After one to two hours you can remove your mold from your object. You then have the opportunity to further edit your art object. It is a good idea to cover your object with clear resin or to seal it with our resi-CRETE acrylic emulsion.
Content: 14 Kilogramm (€6.71* / 1 Kilogramm)
Variants from €32.90*
hydroflow Water Based Casting Compound - Set 35 kg
€219.00*
Inhalte:
35 kg - Set
OUR HYDROFLOW, ECO-FRIENDLY AND WATER-BASED
That's it.
Our hydroflow is a water-based casting compound that you can use to create decorative and functional objects. It offers a cement-like surface that you can decorate with various objects.
It can.
Our hydroflow consists of two components, a mineral powder and a water-based acrylic binder. The hydroflow is easy to color with water-based pigments such as the resi-TINT acrylic inks and is particularly easy to use. You can also add sand, quartzite, shards, dried flowers or mica to your hydroflow object, for example.
That's what it's for.
Our hydroflow offers you various application possibilities. You can craft objects such as coasters, vases, bowls, plates, or planters. Jewelery or sculptures are also possible. You can even create pieces of furniture such as side tables with hydroflow, or you can use hydroflow in structural art.
Particularities.
Due to its water-based formula, hydroflow is environmentally friendly and biodegradable. It offers heat resistance up to 125°C, has a shelf life of up to one year and can be decorated with various solids. Hydroflow is porous and can be sealed with an acrylic sealer such as our resi-CRETE acrylic emulsion with a brush.
Measuring, mixing and processing hydroflow
1.) Mineral powder and water-based acrylic binder are mixed by volume 2.5:1. Place the two components in a suitable mixing cup.
2.) Stir the measured amount in the mixing cup. Use a plastic spatula for this. Stir slowly and thoroughly for 2-3 minutes; also on the bottom and edges of the mixing cup.
3.) Once your mass has reached a creamy consistency, add your desired pigment. You can add a little pigment to the water-based acrylic binder before mixing the two components.
4.) Your mixture is now ready and you have 10-20 minutes to process the hydroflow. After that it becomes too thick and begins to harden.
5.) You have prepared your mold beforehand, which means: it has been dusted off, degreased and is lying flat on your work surface. Now pour the hydroflow color mixture into your mould.
6.) Stir the mass inside the mold to remove any air bubbles. This also applies if the mass thickens quickly when pouring.
7.) The hardening process takes 20-40 minutes. Your form will begin to heat up with the chemical reaction.
8.) After one to two hours you can remove your mold from your object. You then have the opportunity to further edit your art object. It is a good idea to cover your object with clear resin or to seal it with our resi-CRETE acrylic emulsion.
Content: 35 Kilogramm (€6.26* / 1 Kilogramm)
Variants from €32.90*