Heat-resistant adhesive tape 36 mm x 50 m. The adhesive tape has extremely good adhesive strength even on critical substrates such as plastic, rubber and textured surfaces. Nevertheless, it can be removed after use without leaving any residue and in one piece. Even with multiple curing, it does not lift off, making it suitable for repeated drying cycles. Its good stretching and conformability ensure easy masking with excellent working results. Properties High temperature resistance up to 110 °C Fits well Excellent edge tear strength High tear strength during removal Suitable for working with resin Advantages Very high adhesive strength Highest adhesive strength, therefore very good adhesion to critical substrates, such as plastics and rubber No damage to plastic and rubber surfaces

Isopropanol 99.9% (also 2-propanol, isopropyl alcohol, IPA for short) - 1 liter.Used in resin art, this creates wonderful effects and structures. A maximum of 10 percent is added to the pigmented resin mixture for this purpose. Another way to create great effects is to spray the pure isopropyl alcohol onto the wet resin surface. Isopropanol is also great for cleaning the fresh resin off your tools or degreasing the surfaces. You can also dilute it with water for this purpose.Caution!!Highly flammable (VbF:B)! Keep away from ignition sources! Do not smoke! Keep well closed and out of reach of children. Do not use in the immediate vicinity of the eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Allow solution to dry completely before contact with electrical equipment.

High quality disposable mixing beaker made of polypropylene with 650 ml total volume WITHOUT lidScope of delivery 1 piece | printed scale up to 550 mlMixing Cup 550 mlThese mixing cups are used for easy and exact mixing of paints and varnishes and other media, which are mixed from several components. A big advantage compared to the use of e.g. measuring cups is that cleaning time and solvents or other cleaners are saved.It is also a cost-effective option in cases where cleaning is not possible at all, e.g. when processing epoxy resins or similar.    Made of PP (polypropylene), thus good resistance to many media and food safe,    Stable and yet flexible - ,    The cups are smooth and without spout or undercut - thus good residual emptying,    Very good stackability - therefore little space required both unused and used,    The printed scales have a division of 2:1, 3:1, 4:1, 5:1, 6:1, 7:1 and 10:1.

Nitrilhandschuhe Safe Premium, puderfrei von Hygostar Der Nitrilhandschuh Safe Premium ist ein puderfreier Einweghandschuh, der dem Träger vielfältige Eigenschaften bietet. Das schwere Nitril des Safe Premium ist  fett- und ölbeständig und weist Strapazierfähigkeit sowie Beständigkeit gegen Chemikalien und Lösungsmittel auf. Seine texturierte Oberfläche gewährleistet einen sicheren Griff und das hohe Tastempfinden des Handschuhs erlaubt den Einsatz bei präzisen Arbeiten. Erhältlich ist der Safe Premium in einer Spenderbox verpackt. Der Safe Premium ist allgemein sehr komfortabel, da er über einen Rollrand verfügt und zudem beidhändig getragen werden kann. Die Eigenschaften der Nitrilhandschuhe Safe Premium im Überblick: schweres Nitril, frei von latexallergie-auslösenden Proteinen widerstandsfähig, öl- und fettbeständig gegen Chemikalien und Lösungsmittel beständig Griffigkeit durch texturierte Oberfläche hohes Tastgefühl für präzises Arbeiten mit Rollrand, unsteril, passen beidhändig Einsatzbereich für den Umgang mit Gießharz Erhältlich in Spenderbox mit 100 Handschuhen in den Größen M, L und XL.

resi-BLAST - the cell and structure medium Create unique effects such as cells, structures and color gradients. With resi-BLAST, we provide you with a fantastic medium for this purpose. Responsible for the effects is the tension between resi-BLAST and resin. resi-BLAST does not combine with resin, but displaces it. The only important thing is that the resin is wet. Apply resi-BLAST in different ways: Add it directly to the mixed and colored resin in the mixing cup or drip it onto already poured resin. Important facts about resi-BLAST resi-BLAST is the perfect medium for all fans of special effects in resin art. With resi-BLAST you can achieve instant effects. You don't have to do anything else, but you can - as always, that remains your decision. resi-BLAST leaves an oily residue on the resin surface. This is normal. Just wait until the resin has cured and then remove the oil with a dry cloth. Or you can use this oily residue to polish the surface. The effects you create with resi-BLAST are not only visible, but also tangible. So it is an optical and haptic medium. If you prefer a mirror-smooth resin surface, then pour another layer of clear resin to finish it off. Remove the oily residue of resi-BLAST beforehand - please do this only after your artwork has cured. The application of resi-BLAST A)   Drop resi-BLAST directly into the mixed and colored resin. You will immediately see something happening in the mixing cup. Pour this mixture onto your painting surface. Influence the resulting effects if you like: use the hot air dryer for this and create breathtaking and spectacular cells, structures and color gradients. B)   Drop resi-BLAST directly onto the already poured resin on your painting surface. It is important that you drip on areas with at least two colors so that you create strong effects. If you drip on only one color, you will get a monochromatic effect. The right timing is also important. Drop resi-BLAST about five minutes after casting, the resin will then have the right consistency. The wrong timing will simply give you an oily drop on the resin surface, no effect. Influence the resulting effects if you like: use the hot air dryer for this and create stunning and spectacular cells, structures and color gradients. resi-BLAST:     25 ml bottle        

RESIN ART  Experience, Discover, Experience. The handbook by Stefanie Etter Learn what is important for working with resin: selection, UV protection, safety, materials, painting grounds, masking, colorants and mixing - everything is explained in detail and supplemented with many tips and tricks. Discover the possibilities that the medium resin offers you: Are you taking your first steps in resin art? This manual supports and guides you to the finished work of art. You already have some experience with resin? Great! Browse the book and get inspired to do new great deeds. Experience Resin. Join us on a great journey and create your own, very individual works of art. Whether on wood or aluminum, with luminous pigments or crackling effect, with pastes or sprays ... Now it's your turn: Go ahead and become part of the wonderful resin art world! Stefanie Etter has many years of experience as an artist. With this book she passes on her knowledge and skills. But that's not all: she has also been an art lecturer for years and is therefore very close to the people. From her workshops, she knows the questions and problems that can arise when working with resin - and has the answers and solutions. This mixture makes the book a real resin handbook, the Resin Handbook.

The plastic spatula is excellent for mixing your colors in resin. Since the spatulas can be used again and again, they are a good ecological alternative. Cleaning: 1. let the resin dry well. After about 24 hours, the resin can be easily removed by slightly bending the spatula. or 2. clean the spatula with alcohol already in wet condition. Packaging unit: 10 pieces

Our high-quality coasters silicone molds in 8 different designs are perfect for filling with resin, Hydroflow, concrete or similar. There are no limits to your design. The following shapes are available: Square Circle Circle with wavy edge Geode To increase the durability of the molds, do not use sharp objects or excessive heat. Also, please do not store the molds upside down, otherwise the bottom will bulge upwards. Before use, wash out only with clean water and, if necessary, remove any dust or dirt particles with adhesive tape.

Your spatula for your art:Plastic mixing spatula, yellow, ideal for mixing casting resins.Cleaning:1.) Let the resin dry well. After about 24 hours, the resin can be easily removed by slightly bending the spatula. or 2.) Clean the spatulas with alcohol while they are still wet.

This palette / spatula made of heat-resistant and high-quality plastic is perfect for spreading the resin mixture on surfaces. The wrapped handle keeps your hands clean and the shape allows you to spread easily even in the corners.

Sprühflasche 100 ml Plastiksprühflasche mit Drehverschluß und Pumpsprüher. Größe: 100 ml

Wandkalender 2022 Stefanie Etter Art In einzigartiger Manier beherrscht Stefanie Etter das Medium Gießharz. Ob gepaart mit Strukturen oder im sogenannten Urban Style mit Sprühmotiven - Ihr Stil ist immer unverwechselbar. Mit diesem Kalender darfst Du Dich jeden Monat über ein neues Bild Ihrer Kunst an Deiner Wand freuen.

Product Information Wooden Coasters Set of 4 Our square/round real wood coasters are wonderful as for designing with resin. The surface of the coasters is natural. Please prime the surface with acrylic paint before working with resin. - Dimensions 10 x 10 cm / thickness approx. 0.3 cm