DEEPCAST Clear Casting Resin (CER) - Set 37,5 l
€843.00*
Currently not available
THE PRODUCT DEEPCAST
That's it.
You can also work well with synthetic resin beyond classic painting grounds: Cast large casting heights, high volumes, unusual shapes and 3D molds. DEEPCAST ??is a two part resin and one of the highest quality products on the market. The application is easy and safe. With DEEPCAST ??you will create impressive objects.
It can.
When mixing its two individual components, DEEPCAST ??becomes a hard and glass-like cast. It also offers the best possible protection against yellowing. So-called UV stabilizers ensure this: Our products contain a UV absorber and HALS (Hindered Amine Light Stabilizer).
That's what it's for.
We developed DEEPCAST ??specifically to fill cavities. This makes it perfect for making a river table, for example. Pour up to twelve liters in one go with DEEPCAST ??and achieve a layer height of 5 cm and more.
Particularities.
DEEPCAST ??has a long curing time, which means it will not shrink as it cures - an important consideration for crafts and artists. The reason for this is the low heat development. With DEEPCAST, the exothermic reaction when resin and hardener are combined is significantly weaker than with other resin systems.
Measuring, mixing and processing DEEPCAST
1. DEEPCAST ??resin and hardener are mixed by volume 2:1. Place the two components in a mixing bowl.
2. Stir the measured amount in the mixing bowl. Use a stir stick for this. Stir slowly and thoroughly for 3-5 minutes; also on the bottom and the edges of the mixing vessel.
3. Your mix is ??ready and you now have 25 hours* to process the resin. After that it becomes too thick and begins to harden.
4. You have previously prepared your form accordingly. Now pour the resin mixture into the mold.
5. Protect your work from dust or other foreign objects by working in an environment that is as dust-free as possible. Cover it when it's done.
You should pay attention to this:
Although our resins are formulated with the most advanced and safest epoxy chemistry available, you should handle all epoxy resins responsibly and be proactive about your safety:
•Always wear nitrile gloves.
•When sanding cured resin, wear a dust mask, and better yet, wear safety goggles.
•It is advisable to work in a well-ventilated room.
•Avoid skin contact (if resin gets on skin, wash with plenty of soap and water).
•DO NOT eat, drink or smoke while working.
•If eyes get dirty, wash with plenty of water for 15 minutes and seek medical attention immediately.
•Adding inks/varnishes/mica powder/glitter to epoxy changes its properties and may reduce its non-toxicity. If using alcohol inks, DO NOT use a flame to remove bubbles as alcohol is flammable.
DEEPCAST ??does not contain a drying accelerator. Therefore, both the processing and the curing time for this resin are significantly longer than for others.
You can find more technical information about the Eli-Chem-Resin DEEPCAST ??in our overview table.
DEEPCAST ??is available in the following sizes: 1.5 l, 3 l, 7.5 l, 37.5 l
Login